[ perfil de distribuidor ]
We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Fresadoras de mesa redonda DMG MORI NLX 2000|500
máquinas para el procesado de metales / fresadoras / Fresadoras de mesa redonda
Fabricante: DMG MORI
Modelo:NLX 2000|500
Tipo de máquina: Fresadoras de mesa redonda
Número de artículo: 170347302
Cantidad: 1
Fecha: 21.10.2026
Ubicación:
Alemania
Precio:
Seller-item-No.:071817
| General | |
| CNC Turning Centre with C and Y axis and tool drive; Control: Control M730UM with CELOS | |
| Characteristics | |
| Max machining diameter | 356 mm |
| Max. Turning Length | 510 mm |
| Swing- Ø, max. | 755 mm |
| Bar diameter max. | 65 mm |
| Speed max. | -5000 rpm |
| Number of tool stations | 12 |
| Rotary tool spindle speed | 10000 rpm |
| Movements X / Z | 260/590 mm |
| Input precision of C-axis on Mainspindle | 0,001 degree |
| Rapid feed X / Z | 30/30 m/min |
| Drive power main spindle | 15/15/11 kW |
| Drive power tool spindle | 5,5/5,5/3,7 kW |
| Dimensions (L x W x H) | 2,82 x 2,09 x 2,15 m |
| Weight approx. | 5000 Kg |
| CELOS - ERGOline Touch | CELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p |
| (Spindle 1) Standard spindle 15 / 11 kW, 5,000min-1 | (Spindle 1) Standard Spindle 15/11 kW (20/15 HP), 5,000 min-1 Max. spindle speed: 5,000 min-1 Chuck size: 8 inch., 10 inch. Spindle nose type: JIS A2-6 Through-spindle hole diameter: 73 mm (dia.2.87 inch.) Min. spindle indexing angle: 0.001° Spindle driv |
| (Left Spindle) KITAGAWA 8in. Hollow Chuck BR08A621 (SK-OP) | (Left Spindle) KITAGAWA 8-inch Hollow Chuck BR08A621 Three-jaw hydraulic chuck manufactured by Kitagawa Iron Works. Chuck outer diameter: Ø210 mm (dia.8.27 inch.) Through-hole diameter: Ø66 mm (dia.2.6 inch.) Gripping diameter: Max. Ø210 mm (dia.8.27 i |
| (Left Spindle) Hollow Cylinder set for KITAGAWA 8in. Hollow Chuck BR08A621 (Bar work capacity dia. 65 mm (2.55 inch)) (without chuck body) | (Left Spindle) Hollow Cylinder Set for KITAGAWA 8-inch) Hollow Chuck BR08A621 (Bar work capacity dia. 65 mm (2.56 inch)) (Without Chuck Body) Hollow cylinder and draw bar are included as a set. Chuck is not included. Please see the chuck-cylinder combi |
| Rotary tool spindle 29/ 14 Nm, 10,000 min-1 | Rotary Tool Spindle 29/14 Nm (21.39/10.33 ft·lbf), 10,000 min-1 Rotary tool spindle output: 5.5/5.5/3.7 kW (7.5/7.5/5 HP) (3 min/5 min/cont) Rotary tool spindle torque: 29/26/14 Nm (21.39/19.18/10.33 ft·lbf) (3 min/5 min/cont) |
| 12 Station Bolt-Tightened Turret(Standard Specification) | 12-Station Bolt-Tightened Turret (Standard specification) Number of tool stations: 12 Shank height for square tool: 25 mm (0.98 inch.) Shank diameter for boring bar: Ø50 mm (dia.1.97 inch.) (spindle2 side Ø32 mm (dia.1.26 inch.)) Turret indexing tim |
| High-pressure coolant system 1 MPa (1.1 kW) for 50Hz area, 1.5 MPa (2.2 kW) for 60Hz area | High-pressure coolant system 1 MPa (1.1 kW) for 50Hz area, 1.5 MPa (2.2 kW) for 60Hz area With this specification, abilities to remove the chips and to cool the tool or workpiece during cutting are higher compared. A pump which supply coolant to the turr |
| Chip conveyor (right discharge, hinge type) | Chip Conveyor (Right Discharge, Hinge Type) Chip conveying capacity: 390 L/h (102.96 gph) Max. coolant throughput: 170 L/min (44.88 gpm) |
| Interface for Mist collector (duct dia. 150 mm + electric parts for AFS 600) | Mist Collector Interface (Duct f150 mm (dia.5.91 inch.) + Electric Parts for AFS 600) I/F for mounting the mist collector AFS600 that collects, absorbs and dehydrates mist, dust particles and oily fumes generated during machining using the filter. The |
| Standard workpiece unloader (built-in type) | Standard Workpiece Unloader (Built-In Type) This device automatically receives the completed workpiece and carries it outside the machine. Unmanned consecutive operation is possible by combining it with a bar feeder (separate option). Can be operated in c |
| Interface for Bar feeder (LNS) (multiple) | Bar Feeder Interface (LNS) (Multiple) The Bar feeder interface (I/F) is used for connection to the bar feeder which achieves higher productivity by the automatic bar stock feed. To install any bar feeder other than the LNS-made, the I/F needs to be ch |
| Dry anchor | Dry anchor Anchors fitted on the bed to prevent the machine from moving because of vibrations when starting up or because of slight earthquakes. They control vibration in all directions as far as possible. |
| Frequency 50 Hz | Frequency 50 Hz This machine is shipped with frequency set to 50 Hz specification. (Caution) IF the setting is incompatible, there is a possibility of trouble such as operation abnormality and alarm occurrence. Be sure to check the supply voltage and fr |
| Setting Unit mm | Setting Unit, MM The unit to be used for the screen display and program commands is set to "millimeter (mm)". Turning: "MM" specification for the turret Horizontal machining center: "MM" specification for the tapped pallet |
| Islands, open pockets | Islands, open pockets Islands - Programming process can be greatly simplified because minimum input operation is required even for the complex machining. Open pockets Definition of open pockets eliminates tool paths with no machining allowance, |
| High-speed canned cycle | High-speed canned cycle The screen guidance guide to input the stable cycle argument. One line program can command high-speed cutting. High-speed machining cuts the machining time. The cycle whose high speed machining complicated programming can be do |
| Alternating speed | Alternating Speed It can suppress regenerative chattering by fluctuating spindle speed. The cycle is automatically calculated only by setting the fluctuation width in the guidance screen. Regenerative chatter is created by excitation resulting from t |
| Chuck top coolant (Main spindle) | Chuck Top Coolant Unit (Spindle 1) The coolant is discharged through the coolant nozzle on the upper part of the chuck to flush away chips and reduce heat generated on the workpiece during cutting. It uses a different coolant pump from the tool tip coola |
| Air blow for tool tip | Air Blow For Tool Tip Air blow for removing chips and coolant from the tool tip. Air blow is through the turret coolant port. Air blow to the tool tip is effective in removing debris while measuring the tool or removing chips during dry machining.Air / |
| Addition of optional block skip (soft key type 2-9) | Addition of Optional Block Skip (Soft Key Type 2-9) 8 optional block skip functions are added. The switches for enabling/disabling them is added on the operation panel. |
| Without Coolant chiller | Without Coolant chiller If the coolant chiller is not selected, the units (spindle, tool post) inside the machine might be heated by the coolant, and thermal displacement might cause defective machining dimensions. Please select "Coolant Chiller" which |
| Oil skimmer (Screw type) | Oil Skimmer It removes oil that floats on the surface of coolant in the coolant tank to maintain the coolant quality and inhibit the coolant deterioration. This can reduce the coolant disposal cost. The screw type oil skimmer is adopted, which separate |
| Manual in-machine tool presetter (pivoting type) (STD) | Manual In-machine Tool Presetter (Pivoting Type) (Standard) It simplifies the complicated setup work at the tool change. The position of the tool nose is measured precisely by just bringing the tool nose into contact with the sensor, and the measured va |
| Text Engraving Function | Text Engraving Function Program for text engraving can be output. Note: Only available for milling specification. |
| Chuck foot switch (double) for spindle 1 | Chuck foot switch (double) for spindle 1 You can open/close the chuck with two foot switches. |
| Screen display German | Screen display German Language on MAPPS Screen: German Language on MAPPS Warning Screen: German Language on NC Screen: German Language on PC Screen: German |
| IoTconnector | IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETservice) |
| Special equipment | J-002560 Rotary tool outer diameter overhang: 100 mm (3.94 in.) (Y-axis travel limit) J-015425 Dual footswitch for tailstock movement |
| Special equipment | J-EU0003 SCHNEIDER Transformator 45kVA |
| Special equipment | AFS 600 Oil Mist Collector (FANUC/MITSUBISHI) (J-EU1251) |
| Special equipment | RMS-Sensor |
Comparte esta máquina en Facebook: